Questions & Answers for: Honda trim

...center console bolted to the floor i think to get to it you have to pull the center console out the trim piece to the left of the console and the glove box comes out there are two screws on the trim ...

...it up and to the rear.  Remove the ashtray and the screw behind it. Two more screws for the trim plate. Now the radio is exposed. Remember to disconnect the battery so you don't fire the ...

...in thinking its the wiper motor. You can do this but you will need to remove all the interior trim from the rear hatch first. Get a trim clip removal tool at a parts store...it will work much ...

...it hangs down. it is taped now. Yes, that piece is called the "recline cover". You will need the trim color code from the vehicle identification plate on the inside driver's door frame to match

...panel by using a flathead screwdriver to pry it off. careful not damage dash. 2.Remove center trim cover by using flathead screwdriver to pry it off. 3.remove the 8 screw from clock trim cover ...

...difficulty. any help would be appreciated This is more difficult than it looks because the rear trim panels must be removed in a certain order as they overlap at their edges. First remove the

dashboard trim DASH BOARD TRIM. YOU NEED A HAYNES OR CHILTON REPAIR MANUAL. BECAUSE DASH BOARD TRIM HAS SCREWS AND CLIPS HOLDING IT IN PLACE.MANUAL WILL SHOW YOU SCREWS AND CLIPS LOCATION SO YOU CAN ...

...the passenger 3rd row seatbelt in my 2006 Odyssey, which required removal and replacement of the trim panel. Instructions were enclosed with the new seatbelt ordered from Honda, but I had to scan ...

...hatch is closed. The rest are all clips, about 22 in total around the outside edges of the bottom trim. The bottom trim is all you will be able to access from the inside. The sides and upper trim ...

...Open the tailgate: Begin by opening the tailgate and locating the lock mechanism. Remove the trim panel: You will need to remove the trim panel that covers the tailgate lock mechanism. This