Questions & Answers for: Canon triangle warning light

...warning triangle light and the on-off button light flashes. Any ideas please? Had exact same problem. Scanner light should come on at power up. Found ribbon cable connecting scanner unit to base had ...

...warning for Cyan (1/3 full) - Will go refill That is happening because you have "smart" chips on your cartridges, so even though you know there is still some ink left in the tank, if the chip says ...

...triangle) 4) Release the power button The printer takes about 10 seconds to show the number 0. (at this step, i press and hold the reset button twice, each time i press and hold is about 5 seconds. ...

...triangle) 4) Release the power button The printer takes about 10 seconds to show the number 0. (at this step, i press and hold the reset button twice, each time i press and hold is about 5 seconds. ...

...triangle in a red circle) 5. Now you can release the on/off putton. The green power light will go off and the yellow Alarm light will stay on. Now you can run MPTOOL and resetting the ink counters ...

...I have a solution 1: turn the printer off 2 While pressing down the stop / reset button (denoted by triangle within a cycle), press the power button and hold the stop / reset button until the power ...

...triangle in the red circle) and press Power button - hold both buttons until power on indicator will light then release resume button (dont release Power button) and press Resume button 5 times - ...

...triangle), add a printer (click "Power") an indicator light green. 3. Hold the Power Button, release the Resume Button. 4. Not releasing the Power Button, double click "Resume" and release Both ...

...warning lights showing, it is a triangle with an arrow with a squiggly tail inside the triangle, I have checked the power supply which is OK. I have looked in manual but cannot find anything. I ...