...treadmill walking belt. I used a specialty glue that is flexible and super strong. It is used in aeronautical applications so is very strong. Simply apply the glue to a piece of flat and thin rubber ...
Question about Sport 1000 Folding Treadmill PFTL91205 - !
...belt is now at a slight angle between the pulleys. I am sure the pulley will not remain in alignment for long so I intend to glue it in some manor. I think a good low viscosity thread locker like ...
Question about 730 Folding Treadmill Model PFTL71104 - !
...walking belt from the treadmill, lay the belt flat and even on the ground, and measure and equal distance on each end of the belt and mark the belt for cutting on each end of the belt. Cut no more ...
belt is ripping at seamline, can it be glued? the belt should be replaced. you may be able to get a little more life by using gorilla glue, but it is time to order a belt. good luck
Question about Cadence 845 Treadmill Walking Belt Wltl84561
...walking belt is coming apart. The seam is coming apart and I have tried electrical tape, duct tape, clear packing tape, and super glue. None of these will hold the belt together. What can I use to ...
Usually answered in minutes!
346 Questions
191 Questions
188 Questions
214 Questions
122 Questions