Questions & Answers for: treadmill takes magnetic key

Question about 8700 ES Treadmill - Silver Service Delivery! at GNC

4 Answers

...treadmill is on (reset). Place the magnetic safety key at the center bottom of the console. This should normally power on the console and let you choose a workout or start the treadmill manually. Me ...

Ad

...magnetic key off. You need to put the little magnetic key onto the "stop" area after each use, and it will re-set. If you take the key off "start" and the machine stops, you can't start again until ...

Ad

Question about XT70 Shock Treadmill New!

1 Answer

...key lanyard clip are designed to shut down the treadmill should the user fall while using the treadmill to help prevent serious injury. The long answer and I would not advise anyone to do this , but ...

Question about XP Weight Loss 620 Treadmill

1 Answer

gap between reed switch and pulley.6 Replace the hood.7 Plug in the power cord.8 Reinsert the key into the console.9 Run the treadmill to check for a correct speed reading. This may take a few minutes

Question about NordicTrack Treadmill, A2550

1 Answer

...takes batteries, replace them. If this does not work or your console does not require batteries, check the reed switch or optic sensor. Reed Switch: Unplug the treadmill and remove the motor hood ...

Question about C956i Treadmills with HR / WholeSale

1 Answer

...takes batteries, replace them. If this does not work or your console does not require batteries, check the reed switch or optic sensor. Reed Switch: Unplug the treadmill and remove the motor hood ...

Question about 425 Mx Treadmill EPTL88105 !

1 Answer

...takes batteries, replace them. If this does not work or your console does not require batteries, check the reed switch or optic sensor. Reed Switch: Unplug the treadmill and remove the motor hood ...

treadmill does not start. If the console takes batteries, replace them. If this does not work or your console does not require batteries, check the reed switch or optic sensor. Reed Switch: Unplug the

Question about 425 Mx Treadmill EPTL88105 !

1 Answer

...treadmill contact weslo.com or the place of purchase i think if you had a magnet you could put on it and the unit should tun okay, that is how mine is setup. now if your takes a key, you local lock ...

Question about 425 Mx Treadmill EPTL88105 !

1 Answer

...cross walk Replacement Parts for Fitness Exercise Equipment at SPORTSMITH The following link will take you to the safety key for your model. Magnetic Treadmill Safety Key and Clip 208603 SPORTSMITH ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

920 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Exercise & Fitness Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...