Questions & Answers for: tread

Question about LS-2125 Mechanical Sewing Machine

1 Answer

tread keeps coming out of the needle. I tread my needle , the bibbin is treaded I put my material in and start to sew, but when I look I am not sewing because the tread is out of the needle again. ...

Ad

Question about Crosswalk 500 Treadmill

1 Answer

i have a proform treadmill that slips as soon as i step on track i looked at the belt it looks good how do i tighten up the track There should be adjustment screws on the back left and right sides. ...

Ad

Question about 2001 Aurora

1 Answer

no treads on harmonic balancer. Should there be treads on the harmonic balancer because my serpentine belt came off and upon reinstalation properly I found that the belt had treads on the serpentine ...

...when the length going up the stairs meets the strght one at the top Usually the angle of winder treads, I assume that is what youare talking about, is 30degrees as there are 3 treads to get round ...

Question about 2011 Sonata 2.4

1 Answer

quiet" Hi I'm Peter, most of the time when you have high noise from your tires it is related to the tread design. The more aggressive the tread the noisier it will be so if you have all terrain or mud

...2 months ago & the front two have worn to the wires on both sides. a week ago there was still some tread on them. why could this be happening? 1. What brand and model of tire was fitted? 2. Please ...

keep getting uneven wear on rear tire for 2004 lincoln ls if the wear is on the inside of the tread ---wheel bearings , failed suspension bush,arm if it is on the outside of the tire tread ,-- bent ...

Question about 2003 Eclipse GS

1 Answer

tread making ticking noise Rhythmic ticking sound coming from right tread. Noise speeds up and slows down along with the speed of the tread travel. Something stuck in the tread or tire- rock, nail, ...

Question about 2003 Eclipse GS

1 Answer

...in different ways. I use a needle thread starter. I also use a method of feeling the nettle and the tread. Cut the tread for a clean end, place the tread between your thumb and finger so that you can ...

Question about 2003 Eclipse GS

1 Answer

how do i check tire tread with a penny? The ring of dots around the edge of a British penny is 2mm. US Penny Turn the penny so that Lincoln's head points down into the tread. See if the top of his ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...