Questions & Answers for: transport rear projection tv laying

TV. It will pop right off from the six attaching points. Now you'll see a black piece of fiber board held on with four screws. Remove the screws and panel. Laying down and looking up inside, you'll be

...tv doesnt' turn ont. It just makes a eeeeeeeeeeeee sound for 2 sec than the red light in front start flashing. I got it off of a friend. When he transported it he layed it down. It worked before ...

...hurt them. I transport projection screen Tvs all the time by laying them down flatt all the time. You may have to adjust the convergence a little when youre finished moving it, but it wont hurt

...tv down to transport it rear projection tvs can laydown ON ITS BACK. if its in an open bed truck and plan on standing up. DO NOT FACE SCREEN TWORDS HOOD!!!!!! the screen will cave in. hope that

...down for this. Once home I let the TV sit for about 3 hrs.. After I hooked it up it worked fine for about 4 hrs. I shut it off and went to bed. This morning I turned it on and it worked for 5 min. ...

...tv powers up and works fine except for a line down the center of the screen. none of the service menu settings seemed to affect it at all. I lay the unit down transporting it and was wondering if ...

...transport the TV is standing up with the front secured to a 'side' of vechile. If you don't have that choice lay the TV down on it's face. With both make sure you have plenty of moving blankets.The ...

upright? Move it upright best for the tv.These tvs have chemicals in it three CRT tubes colors guns. It's always best to transport upright. They are not shipped at anytime from the factory laying down

...tv I transport them all the time and the best way to do it is to put something down soft in the bed of a truck then lay it down screen first on its face. If you stand it up in the bed of a truck the ...