Questions & Answers for: Pontiac Sunfire transmission shifting

1997 pontiac sunfire manual transmission won't shift out of gear. Transmission is stuck in one gear. shifter won't move left/right at all and forward backward seems like it's not grabing anything. i ...

Ad

...freely, but doesn't engage other gears or neutral. CHECK BRAKE LIGHT SWITCH FUSE AND THE BRAKE TRANSMISSION SHIFT INTERLOCK SOLENOID FUSE.IF THEY BOTH CHECK OUT OKAY.YOU HAVE A FAULTY BRAKE

Ad

...when it shifts to 3rd its just like goes to nuetral. Low fluid level or disconnected vacuum line at transmission.If not add some B&M shift additive.Any further trouble,contact a reputable ...

Question about 1997 Sunfire

1 Answer

...transmission's shifting. If you are having the same problem with a new tranny, then I would say the problem could either be with a sensor on the transmission, or there could be a problem with the ...

Question about 2003 Sunfire

1 Answer

make sure it's a Low Viscosity Synthetic Transmission oil. High viscosity transmission oil will cause the gear shifting to stick and will cause shifting issues. Thank you for using fixya and good luck

Question about 2003 Sunfire

2 Answers

I swapped out the transmission in a 1997 Pontiac Sunfire for one from a 2001. Everything is back together but the shifter cable does not seem long enough to allow me to shift through the whole range ...

...shifting into gear. Usually when a car fails to move, internal parts of the transmission break and sometimes shatter prevent the clutch pack from functioning.  The purpose of a vacum ...

...fine, just cant always get it out of park. Neutral is dangerous and not a real fix. Tx. Automatic Transmission Shift Lock Control Description and Operation The automatic transmission shift lock ...

Transmission will not engage any gear except park -Make sure transmission fluid is full. -Make sure shift linkage is hook up to transmission shift handle or safety switch. And ask some one to watch ...

Question about 2002 Sunfire

1 Answer

transmission is shifting hard. Other than that, there is only a few things that will cause this. The speed sensor tells the computer when to shift the shift solenoids. It may not be "seeing" a quality

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...