Questions & Answers for: transmission lever Motorcycles

...transmission control switch (TCS) detent. Loosen manual control lever-to-control cable retaining nut. Move transaxle manual control lever to OVERDRIVE position or D (DRIVE) position on vehicles ...

...transmission shift lever stud ball. Install the retainer to the shift cable and transmission bracket. Feed the shift cable through the floor panel. Lower the vehicle. Adjustment Procedure Ensure that ...

...lever. a transmission control switch on the transmission range selector lever. a cable connecting the transmission range selector lever to the transmission manual control lever. a brake/shifter ...

...lever clicks, the transmission is in second gear. The second time the lever clicks, the transmission is in the "drive" position. Tighten the single nut which attaches the end of the transmission's ...

...26 7A216 Transmission Shift Selector Position Insert 27 7302 Transmission Selector Lever Arm and Support 28 7E395 Shift Cable and Bracket 29 7210 Gearshift Lever 30 3E691 Steering Column Lock ...

...transmission selector lever in N or P. If it is the: C3 And A4ld Transmissions It's on the transmission.... Neutral start switch and its location on the C3 and A4LD transmissions Yes it is a hex ...

...lever and transmission manual lever in the(D) position, tighten the nut at point A to 17-24 Nm (12-18 ft-lb) torque. Use care to prevent motion between the stud and rod. Remove the three-pound force ...

...lever on the transmission moves through the full range but when the cable is attached at both the transmission and the shifter lever inside I can't get the full range. When I put the lever on the ...

...transmission, 5-Speed. - ECM Engine Control, M/T. - Transmission oil SAE 75W85, 2.5 Litres. - Clutch pedal assembly. - Gear lever assembly, with console. - Gear lever cable set. - Gear lever boot.

...lever. Move transmission shift lever to neutral position. Depress brake, brake lever should automatically release. Release brake pedal. With brake lever and pedal released and transmission in neutral ...