Questions & Answers for: transfer corona problem

...Only the image do not transfere to the sheet. Open the right side door and check the transfer/separation corona unit. It may be a broken corona wire, and make sure corona unit is sitting

...transfer corona. This could be due to several different things, usually it's a dirty corona, maybe excessive dust or toner in the corona assembly. Toner conducts electricity and can leak voltage from ...

...for the conections and HV1, wich suplies the coronas. GOOD LUCK. Change the transfer/separator corona front holder. transfer crona is lekage change the tranasfer corona ano clear the code error ...

...code Error E000069-00000 (the tech was just in and did a PM) it is a transfer corona problem ,clean it first.even its not ok change the corona wires. if its not ok finally change the transfer corona

...transfer corona if you have already tried replacing the toner cartridge. The transfer corona charges the paper so that it will pull toner off the drum and it can go bad. Email HP and find out if the ...

...copy glass too ) - replace charge corona - replace transfer corona - clean/replace paper pick-up, feed and separation rollers. In most cases the problem will be solved with new transfer corona

...corona unit defective SC 300 Charge corona error - replace corona unit and enblock as set SC 300 Charge corona error - replace Transfer Belt Replace charge wire and grid or charge assy B2472010 ...

...corona transfer error"This is an error regarding a problem with the transfer corona, it seems you had a high voltage spike on your machine, causing this ...

transfer seperator corona location The transfer unit is located indoor the right cover.This model not use transfer corona ,use transferr roller

transfer/separation corona unit. You probably need new corona wires strung, or new units. You will probably have to contact an authorized Canon dealer for repairs and parts. This model is very old now