Questions & Answers for: transfer case drain plug

...transfer case noi How do I drain and fill the transfer case? find drain plug ,bolt with allen head, loosen and remove( place drain pan underneath first) drain fluid, replace plug, ...

Ad

...transfer case and exactly what fluid do i use GM Full-Size Trucks 1980-1987 Repair Guide Transfer Case - FLUID RECOMMENDATIONS The type of lubricant used in the transfer case varies with model year ...

Ad

...transfer case hold 1. Park the truck on a level ground. 2. Remove the drain plug on the side of the transfer- case. When the gear-oil starts to flow down from that side drain-plug, the correct amount ...

Question about 1990 Pickup

1 Answer

...transfer case is located center-left of the car. Lift the left side and position the jack stands near the front and rear wheels. If you have an all-wheel drive model, the transfer case is an integral ...

...transfer case fluid on za ford escape Hi there, CAUTION New transfer case lubricant must be installed any time the transfer case has been submerged in water. Also, transfer case failure CAN result if ...

Question about 2003 Escape

1 Answer

...transfer case To fill transfer, you didnt list the type of truck but all are about the same. what is not the same is the type of oil used in the transfer case, its important to use the correct type. ...

...transfer case from 2002 tahoe Disconnect the ground cable from the negative battery terminal, by using a wrench to loosen the retaining bolt and pulling the clamp off the terminal.2 Raise the vehicle ...

...transfer case removal How to Remove a Chevy Blazer Rear Transfer Case The transfer case on a Chevrolet Blazer is underneath the vehicle, mounted to the rear of the transmission. On four-wheel drive ...

...transfer case and what fluid does it use i would like to check my transfer case fluid and know what kind to use if it is low The front and rear drive shafts connect to the transfer case. Unless there ...

...transfer case? You should see either 2 plugs with 3/8" squares or two bolt heads about 24mm. They will be on the side that faces the rear of the vehicle. One will be towards the lowest point of the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...