Questions & Answers for: Ford Explorer transfer case clunking

...transfer case may be causing that clunk - as far as high spped clunk and activity you have a serous problem and you just might drop the transferr case have an accident fliping over..............Mike ...

...transfer case, is this right? if so how difficult is it to fix? i havent actually remove the u-joints and checked them but i have had that problem before and this noise is too loud to be that. I hate ...

...transfer case for stretching. when i replace this chain should i expect damage to the sprokets that its riding on as well or are they hard enough to take the wear? I would expect no damage to the ...

...transfer case or transmission will not let it go back to automatic drive it is stuck in lower gears, and, the o d off light and the 4high and the 4low lights keep flashing in the instrument cluster ...

...transfer case. I would initially be looking at the transfer case as the culprit since you mentioned the 4wd light coming and going. My thinking is that the 4wd engagement solenoid is malfunctioning ...

transfer case, some chain is wore out, I feel that he is wrong, we never used the 4 wheel drive, how could this be. Help Please!! Even if you dont use the transfer case it need maintenance and limited

...transfer case. what is the most in expensive way to fix problem. problem is when braking accasionally feel slip in when accelerating from park position hear a clunk ,clunk. problem I have a tight ...

...transfer case was bad and then I was told its not that. Any ideas? If the diffs have been changed,they may be a different ratio.That would cause vibration and clunking.Just a thought.Hope this ...

transfer case noise making clunking noise from transfer case i have checked drive shafts no slackness wow eral vague stuff to work with..  do you plow?? off road? or did truck used to do this....

...transfer case causing the front axle to bind. You can physically look at the CV joint boots to see if they are torn open and many times you can grab onto the axle and give it a good tug to see if it ...