...transfer case shift motor connector (toward the GEM). Visually inspect all terminals, pins, crimps, and connectors closely. Repair any wiring conditions in the contact plate circuits as necessary. ...
...transfer case motor. I ordered one for around $70 and installed it. Problem fixed. I hope this helps. the first thing i would check on any 4x4 AWD is to see if the vacume lines were conected to the ...
clunking during acceleration and deceleration, binding in turns If it is a 4x4 it could be the transfer case. Mine used to do that before I overhauled the transfer case
...transfer case.When backing it clunks and jerks.when turning going forward or rev it acts as though the brakes are being applied ?.It appears to be shifting out of 4 hi-4 lo etc.the light on the dash ...
Usually answered in minutes!
2,188 Questions
1,825 Questions
1,627 Questions
1,696 Questions
1,161 Questions