Question about LaserJet 4700 Printer
...transfer belt(ITB). 2) Causes the toner to move from the surface of the ITB to the paper. In the CLJ 4700, there is an Electrostatic Transfer Belt instead of an Intermediate Transfer Belt. This ...
...transfer belt had blue smudges in the same pattern as printed on the paper. I cleaned the belt with a soft rag and reprinted - the same thing happened: still get blue smudges. Any suggestions? Thanks ...
Question about Color LaserJet 4550n Printer
transfer belt with an air compressor but it didn't work. I have 59% life left on my transfer belt so this is not the solution. Is there anything else i can do to get my printer to work properly? Hi, I
Question about Color LaserJet 4550n Printer
...to be replace What's the difference between the transfer roller & transfer belt and what does the belt look like? tranfer belt is a large mylar black belt. transfer roller is a skinny gray foam ...
...transfer belt The printed paper shows red en blue stripes. These stripes are also visible on the transfer belt. Can I clean the transfer belt? Do I have to replace the belt or the cartridges? Thanks! ...
...Transfer belt count how to replace transfer kit 4700 Please Contact me at [email protected] and I'll send you the reset solution. Laser printers like the Hewlett Packard LaserJet 4700 include a ...
transfer belt assembly. The transfer belt is how the printer moves the image from the colored toner cartridges to the paper. The surface has a special organic that allows the toner to be picked up and
...transfer belt on hp color laserjet cp2025 im a servicer and i wont to now how to replace transfer belt. my problem is :printer realy whine at trransfer belt? what i need to do? maybe reaplace ...
transfer belt of an hp 4650n The printer is pretty old but most of the parts in it are new but now it is starting to collect toner on the transfer belt. We don't want to have to buy a new belt
Transfer Belt (ITB, Transfer Kit) HP Color LaserJet CP4525 CM4530 1. Open the printer's right side door. 2. Use the blue lever (see callout 1 in picture below) to lower the secondary transfer assembly
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions