Questions & Answers for: trans front seal

Question about 1993 Explorer Limited

1 Answer

...front main seal on the transmission on a 93 Ford exploerer 4x4 and is it worth the trouble? Should I just buy a new transmission? Also the rear main seal of the motor is leaking.. You have to remove ...

Ad

Question about 1992 F350

1 Answer

front of the trans. If I let it cool it stops. I think it is the front seal and so changing it but wondering if it may be the temp in teh trans and over heating? If not those things then what? replace

Ad

...front trans seal. This cannot be repaired without removal of unit.However, if leak is minor, you can try an additive such a Lucas trans sealer (only one I've ever seen that actually works without ...

where is the front seal on my transmission The seal is located at the front of trans. It seals the oil going from the torque converter to the front pump in trans.

... do you think it is the front seal and the torqu converter? The noise may be flywheel bolts loose. What color is the fluid? Red is trans= front seal in trans leak Black is oil= rear main seal on ...

Question about 2004 Sebring

2 Answers

...in f150 from crown vic 302 5.0 trans leaks now Either the tranny pan seal or front and rear seals are bad. DID YOU HAVE THE TRANS SEAL REPLACE AND IF THE FLYWHEEL IS BENT ,THEN YOU NEED TO REPLACE

...trans meet than front seal anywhere else fix and or replace front seal two choices first can try a trans leak additive follow instructions carefully or need to pull trans to replace seal Majority of ...

...trans dust shield. Replaced front seal There is a brass bushing in the trans pump that could be worn. Verify easy things first like trans fluid temp and proper flow to the cooler. Restrictions and ...

...front pump baffle clogged? Pull the trans and replace the pump seal. Check for updates and modifications to the pump or seal area. No front pump baffle,you made that up!! Hi, its not that the pump is ...

Question about 1997 Ram 1500 Club Cab

1 Answer

...front pump. The seal is easily damamaged if not properly fitted.Once the trans is against the engine the converter can be slid forward to bolt the flex plste.There should not be more than approx. 1/4 ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...