Questions & Answers for: toyota 3 intake coolant leak

Question about 1994 Xtracab

2 Answers

Toyota 3.0 3VZE Hello. We have had our 4Runner for 10 years now. About 8 years ago we knew something was wrong. We took it to 3 different mechanics who spent over 3 straight days of diagnostic repairs

Ad

...TOYOTA CAMRY V6. MY QUESTION IS: WHY DOES MY CAR BURN UP SO MUCH WATER, BUT IT DOESN'T OVER HEAT. AND I DO MIX IT 50/50. AND MOST OF THE TIME I CAN SMELL THE ANTIFREEZE. AND THERE IS NO LEAKS. If you ...

Ad

...Intake Manifold Gasket. This gasket may be leaking, worn, or damaged 3. Check the cylinder head for worn or scorn cylinder block.(This will require total breakdown of the engine) 4. Check the water ...

Question about 1994 Camry

1 Answer

...3 years or more)new hoses, hose clamps. now for the tools, scraper, ratchet, extension, and metric sockets, flat tip screw driver, and maybe pliers. got it, good, lets start. follow the top hose to ...

...Toyota Corolla 2003? DTC P0171 is set when fuel trim is driven rich beyond a certain value. Possible causes are: 1. Exhaust system leak. 2. Improper fuel pressure. 3. Fuel injector restricted. ...

...Toyota Corolla died today when she was at a stop light. She had to start it again and was able to drive but it has some hesitation problems and poor acceleration at times. I did remove and clean the ...

...Toyota Tacoma will need. This depends not only on the make and model, but also the engine size. Models made before 2005 may have a 2.4L, 2.7L or 3.4L engine. The current version may have a 2.7L or ...

...toyota corolla dx coolant spraying from back of engine Coolant is spraying on the firewall from under the intake. I can't see where the leak is coming from. Hi. A big possibility is that you ...

3. To locate the intake air leaking source, take a vacant mineral water bottle, fill it with tap water, make a small hole on the cap with a bag sewing needle, invert it and spray water by pressing the

...3- Throttle body checked and cleaned with TB cleaner. 4- Throttle body plate screw checked. Plate was fully closed. 5- IAC (Idle Speed Control) valve opened and cleaned with Tb cleaner. It works ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...