...and there is nothing much you can do except replace the touchpad control. It is a common problem with all electronic ranges. If the range is 13 years old I would thik about replaceing it. Good ...
Question about JBP90 Electric Kitchen Range
...touchpad of the range. Can you clear the E2 F3 by pressing the cancel button? If not, shut off the power to the range for a few minutes and see if the error code goes away. If the error code remains ...
Question about CER1115AA Electric Kitchen Range
...a bad connection from the touchpad to the control. Unplug the range. Open the control panel. Unplug the ribbon. Plug the range back in. If it beeps,replace the control. If not, replace the
...touchpad of the range. Can you clear the E2 F3 by pressing the cancel button? If not, shut off the power to the range for a few minutes and see if the error code goes away. If the error code remains ...
Question about 71414 / 71419 / 71410 / 71412 Gas Kitchen Range
...touchpad to EOC...plug range back in...leave over night...if f1 code comes back it's the EOC...if the error code clears it's the touchpad...replace the part with the problem...if touchpad built into ...
...touchpad to EOC...plug range back in...leave over night...if f7 code comes back it's the EOC...if the error code clears it's the touchpad...replace the part with the problem...if touchpad built into ...
...Range Touchpad Not Working My stove is only 2 years old and I can't cook in the oven unless its 350 degrees. The touchpad does not work at all. I have also been having problems with the right front ...
...range control (ERC) is detecting a problem with one or more key on the touchpad. This fault code can be caused by a defective touchpad or the ERC. To determine which part is bad you need a technician ...
...range f0 Buttons on touchpad initial work except 0 9 4 and 5. These buttons never work. Can set bake and it goes to 115 and shuts itself off. Then none of the buttons work. After 5-10 minutes it ...
Question about LRE30451 Electric Kitchen Range
...range oven touchpad buttons not working Did they stop working after running the self-cleaning cycle? That is what happened to mine. I moved the oven and unplugged it. Left it unplugged for a few days ...
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions