...in it. The clutch hub nut torques 60-80 ft. lbs. left handed with one line of 271 Locktite. Make sure your torque wrench will torque in the left handed direction. Not all wrenches will. Good
...wrench in tight space.?many in. lbs. Torque values are : Two top bolts. 90-110 in. lbs. Four cover bolts, 90-120 in. lbs. I made a special tool to torque the oil pump bolts with. They're socket head ...
how do i remove clutch main shaft nut 1984 fxrt The nut has left-handed threads. It should be torqued to about 80 foot pounds max. I usually use an air wrench but you may need a "primary locking bar" ...
...foot pounds LEFT HANDED. Put one line of Loctite 271 red in each nut. You will need a torque wrench that will torque in the reverse direction. All torque wrenches won't do that. Good Luck ...
...will require either an impact wrench, or a torch, to remove the engine sprocket nut, as it's torqued to about 160-180 Ft/Lbs, with RED LocTite! The labor blue book lists this as an 6-10 hour ...
Question about 1993 FXR Super Glide
...Absolutely and positively don't do this job without the service manual, correct tools, and torque wrenches. Also note that the cylinder torque procedure in the service manual does not work ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions