Question about 2002 FXD Dyna Super Glide
need the torques specs for the 2 nuts on the clutch on a harley need the torques specs for the 2 nuts on the clutch of a 2002 harley dyna super glide 50 ft lbs and it is a left is tight nut...don't ...
how to change oil in 2003 HD FXD Dyna Super Glide How do i go about changing the oil in a 2003 HD FXD Dyna Super Glide remove the drain plug from the oil pan, you will need either a 3/4" box wrench or
...torque wrench capable of putting 150-165 foot pounds of torque on the nut. You'll also need a torque that will torque to 60-80 foot pounds LEFT HANDED. Not all torque wrenches will torque left handed ...
...wrench to remove the engine sprocket nut and the clutch nut unless you have a "locking bar" or something to wedge into the primary chain to lock the primary up so you can retorque the engine and ...
I have a 2006 Harley Dyna, was wondering if front fork torque specs are the same as Sportster front fork specs? I have quite a gap between triple tree and goose neck...fork lock pin doesn't line ...
what is the size of the allen wrench needed for the transmission oil plug? it's best to use a 5/8" wrench or socket. if you ever broken off an hex wrench into a blind hex hole, it can be a major pain ...
torque specs derby cover 2001 dyna super glide What are the torque screw specs and sequence for replacing the clutch inspection cover Tighten inspection cover screws (13, 14) to 84-108 inlbs (9.5-12.2
2007 primary cover bolt torque Correct torque for bolts Hi Anonymous, 10 ft lbs. Have nice day.
Torque spec rear axle nut Torque specs for rear axle nut FXDC Hi Anonymous, 60-65 ft lbs. Have nice day
Question about 2001 FXD Dyna Super Glide
how do i adjust neutral on my harley davidson 5 speed? Adjust your clutch cable. With the bike at room temp (cold,unridden that day) The cable adjustment will require one each 1/2 in. wrench and 1 ...
Usually answered in minutes!
137 Questions
126 Questions
109 Questions
61 Questions
45 Questions