Questions & Answers for: torque wrench Motorcycles

torque wrench. When using a preset-type torque wrench, be sure to tighten slowly and not to overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt, and retighten it from the

wrench is not torque controlled – meaning it will stop when the nut or bolt is tightened to a certain torque – you will need to go slowly, and periodically check the torque value of the nut or bolt to

torque wrench extension bar, which fits onto the square drive of the torque wrench. http://www.dmctools.com/Products/torque_conversion_charts.htmlAt the other end of the extension bar is a male square

...torque wrench and a 1/2" combo wrench).55 ft/lbs is about the territory of head bolts on automotive engines with 5/8" head bolts.1/2 drive torque wrenches usually read in ft/lbs,so you need a 3/8" ...

...Torque wrench/torque not readilly applied.When putting the calipers back on the 2 attaching bolts,usually allen wrench type need only be snugged up tight as you can get them use a wrench for a little ...

...instructions I need to know how to set my wrench to 780 inch pounds the wrench only goes to 250 You can not use that model for the torque you require. A larger capacity torque wrench will be

The ratchet on craftsman microtork torque wrench 44593 does not work 44593 torque wrench ratchet part will not ratchet either way The ratchet pawls have seized and a ratchet rebuild kit is needed.

...torque wrench only gos to 130 nm,what am I doing wrong You have the wrong size Torque Wrench. IF you Torque Wrench measures nm, and it max'd out @ 130, you need a larger Torque Wrench. Convert nm to ...

...torque wrench look like torque wrench Martin, Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some ...

...torque wrench On a 3.4L grand am, my info says 89 inch lbs. You local auto store will sell torque wrenches, inch pounds or ft pounds. For small torque, I use inch pounds torque wrench. If you snug it ...