87 samurai bolt torque specs for engine need bolt torque specs for head,intake & exhaust manifolds and clutch pressure plate for 1987 suzuki samurai sohc 1.3L 4 cyl. The haynes book is not recommended
need to know torque on rod & head bolts samurai need to know torque on rod & head bolts samurai 1.3 carb You need to gradually torque the bolts down in the proper sequence and end on 46-50.5 lbs.
87 suzuki samurai change front brake pads what do i unscrew to change the front pads I found two pins that have plastic caps and need allen wrenches is that them? the allen wrench bolts should be the ...
to get the max power out of it stock before i statrt really wrenching so what can i do to get hp or torque with just wrenching on it stock Suzuki G13 is a good engine that doesn't want for much.... To
suzuki vitara 1993 camshaft bolt torque settings Camshaft bolt sprocket Torque - 41 - 47 Ft lbs.
what is the valve clearance and torque setting for headbolts on a suzuki 1.3 sport intake- 0.13 - 0 .17 mm exhaust- 0.16 - 0.20 mm when engine is cold head bolts 51 - 54 lb ft
Hi there can someone help me with head torque for a suzuki sj50 1.3 sierra 1986 thank you regards terry cylinder head bolt torque 46-50 ft lbs.
Head torque specs for 93 Nissan atlas FD42 alloy head petrol engine then 65-70 lbs if a cast head then 80 or so ,if a turbo diesel then 110lbs
FD42 big end torque FD42 ? big end? sounds, like ROD cap bolt/nut torque. well no mater, why not read fsm, click sammi here. http://www.fixkick.com/sammi-stuff/index.html
Question about 1988 Samurai
torque wrench setting for a pressure plate on a1988 toyota pickup 5spd
Usually answered in minutes!
33 Questions
32 Questions
34 Questions
28 Questions
24 Questions