wrench warning light on that wrench light comes on every 45,000 and every80,000 miles. it doesnt mean anything. push the select and unit buttons and turn on car and then hold for 10 seconds adn it ...
head bolt torque on 1990 couger 3.8 v-6 Tighten in 3 steps: Step 1: 7.5 FT Lbs Step 2: 15 FT Lbs Step 3: 24 FT Lbs(to torque bolts & nuts, start in center using crisscross pattern) I suguest you ...
...shift lever to between 10- and 20 foot-pounds of torque with a torque wrench. Lift the vehicle with the jack and remove the stands, then lower the vehicle to the ground. I hope this
gauge light that looks like a snowflake and gauge light that looks like a wrench came on ..What does this mean ? I bought the car used with n manual ..can you help.. snowflake is probably a head light
...cover. This is the info I have for the rear, It seems to be a successive amount of torque. I would verify the other side with a torque wrench to see how tight it is when the torque wrench clicks
how do i remove the driver seat in a 2000 mercury cougar when i can not reach the bolts and the seat does not move You just have to get the bolts out. The rear bolts can be somewhat difficult when the
Alternator bolt sides stripped on 2001 Mercury Cougar V6 I have a 2001 Mercury Cougar V6, I was in the process of taking the Alternator out, I got 2 of the 3 out, there is a nut near the firewall and ...
3.8l 232ci rocker arm torque specs they should be torqued between 17-23ft. lbs. or (23-31Nm)
89 cougar front end torque need torque settings for front end which ones
Need torque setting for cylinder head 1995 mercury cougar 3.8 New bolts are recommended, but the following applies. For 3.8-liter engines manufactured from 1994 until 1995, the cylinder head requires ...
Usually answered in minutes!
1,305 Questions
630 Questions
345 Questions
361 Questions
333 Questions