Questions & Answers for: Kia torque wrench

...or tightness of the Power steering pump belt. How tight should it be!!!!!!!!!!! I have never used a torque wrench on them just tighten it down good 1/4 inch play in belt is lots!! hope this ...

plug sockets.from size 5/8 to 13/16.you probably need size 5/8 socket.you need extensions different sizes.and universal joints.to reach hard to get plugs.you need torque wrench. and spark plug gap set

...torque wrench only goes to 150 that sounds like it would be to much torque and the hub would not be able to turn You are talking about a hub on a spindle of a front wheel drive car? You took off the ...

...my way unless its another mechanic ,you know the sort of thing with a few mechanics taking the rise out of one and other ,like what do you want the torque wrench for ,you a weekend mechanic or what

...EXTENSION, YOU NEED SPARK PLUGS GAP GAUGE AND A 3/8 RATCHET WRENCH. YOU NEED A TORQUE WRENCH ITS NOT MANDATORT BUT JUST DONT OVER TIGHTEN SPARK PLUGS OR YOU WILL DAMAGE THE ALUMINUM HEAD

...value for an oil drain plug on a 2006 kia optima Never heard of anyone using a torque wrench on an oil drain plug Kind of silly --just tighten it up don't go crazy Do you even own a torque

kia picanto wheel torque wrench settings wheel nut torque wrench setting please 100 NM

torque setting 4cylinder head bolt Need to use both torque wrench and angle dial wrench. Tighten, unscrew, tighten, unscrew and tighten again. See table attached.

Put some thread-lock compound on the bolt also, as that is standard practice. There may be at the transmission end some means of stopping the crank from turning, and then you could use a torque wrench

...torque wrench to tighten the flywheel bolts to 78 - 80 ft-lbs (106 - 112 Nm). Use a torque wrench to tighten the clutch plate bolts to 19 - 21 ft-lbs (26 - 29 Nm). Reconnect the battery and start the ...