Questions & Answers for: Dodge torque wrench

torque wrench would be used to tighten the bolt. Does anybody know the torque value? How many foot pounds (or Newton meters) would you set the torque wrench to? not sure if this link will help you out

Ad

torque wrench for installation reference. Hold flange with Holder 6719 and four bolts and washers. Remove pinion nut. Remove flange with Remover C-452. Remove pinion seal with a pry tool. Removing the

Ad

Question about 1999 Caravan

2 Answers

...torque wrench. You will also need a torque wrench to tighten the main straps on the fuel tank to 40 foot lbs. and the T strap to 250 inch lbs. The fuel pump is inside the gas tank on your van. Good ...

wrench set Torque wrench 1 Determine which alternator your Dodge Intrepid will need. You'll want to be sure the new alternator is compatible with your Intrepid's engine. Models produced after 1997 are

...wrench set Torque wrench Determine which alternator your Dodge Ram will need. You'll want to be sure the new alternator is compatible with your Ram's engine. A Dodge Ram made after 2001 may be ...

Question about 2000 Ram 1500 Truck

1 Answer

torque wrench. If you are using new bearings the torque spec. is 15-25 in. lbs. If you are using your old bearings the torque spec. is 10-20 in. lbs to rotate. To measure this you will need to tighten

Question about 2005 Stratus

1 Answer

...torque wrench, with a maximum 2 inch extension in the 1/2 inch square opening of the tensioner bracket (Fig. 9). Apply 141 Nm (104 ft. lbs.) of torque, counterclockwise to the tensioner bracket while ...

(19 lb-ft). It's important to use a torque wrench to ensure the proper torque is applied to the bolts to avoid over-tightening or under-tightening, which could lead to problems with the exhaust system

...wrench, a torque wrench, a pry bar, a hammer, and a replacement CV axle. Raise the vehicle and secure it on jack stands. Use the jack to lift the vehicle and place jack stands under the frame for ...

How do I torque standard size connecting rod bearings 2003 dodge durango 5.9 Dodge Durango 5.9L OHV Connecting Rod Torque Specs : 45 ft-lbs. you will need an accurate torque wrench

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Dodge Caravan
2000 Dodge Caravan

2,271 Questions

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

1999 Dodge Ram
1999 Dodge Ram

1,788 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2005 Dodge Caravan
2005 Dodge Caravan

1,496 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...