Questions & Answers for: Craftsman torque wrench

Ad

Question about Tools 1/2" Air Impact Wrench High Torque

2 Answers

1/2 air impact wrench will not turn socket. Air just comes out the small vents on the bottom of the handle. Any suggestions? Make sure the fitting are tight on the hose and gun. Also make sure that ...

Ad

Question about Tools 1/2" Air Impact Wrench High Torque

1 Answer

Hi,

Hi, The socket adapter spins before i engage trigger The seal is bad inside leaking air pressure to the gun without squeezing the triger. Get a reseal kit from Sears

Ad

Question about Tools 1/2" Air Impact Wrench High Torque

1 Answer

My brother passed away and i was left his tools. I have a Craftsman Model 875-71229 Air Impact Wrench, but no manual. I do use tools, but as I'm not a mechanic, I was thinking its probably of no use ...

Question about Tools 1/2" Air Impact Wrench High Torque

1 Answer

1/2-in.impact wrench model 875.191183 dose not have the power to lossen bolts with no air leaks the vanes ore wore out

...torque from impact wrench you should always recheck with tension wrench for correct torque specs or at least hand tools such as breaker bar, spanner, ratchet depending on what your doing up and ...

Question about Tools 1/2" Air Impact Wrench High Torque

1 Answer

...torque wrench for reading. This low tech method will give you a rough idea. Higher pressure may give you better result. If you have used your air wrench for a while. Clean by adding diesel fuel into ...

how do i get more torque out of my craftsman impact gun? buy a better gun the cheap ones dont have any power

Question about Microtork Torque Wrenches - Model .: 9-44593 Torque Range: 25 250 in./lbs. 1 Drive Size: 3/8"

1 Answer

...instructions I need to know how to set my wrench to 780 inch pounds the wrench only goes to 250 You can not use that model for the torque you require. A larger capacity torque wrench will be

Question about Microtork Torque Wrenches - Model .: 9-44593 Torque Range: 25 250 in./lbs. 1 Drive Size: 3/8"

1 Answer

The ratchet on craftsman microtork torque wrench 44593 does not work 44593 torque wrench ratchet part will not ratchet either way The ratchet pawls have seized and a ratchet rebuild kit is needed.

torque wrench. What is the proper way to replace it? I noticed that the nut on the inside came loose. If I re-tighten the nut will it effect the torque calibration? I don't know why but I&

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Craftsman Air Tool and Compressor Experts

John Trevino

Level 3 Expert

1407 Answers

JOHN LAPIER

Level 3 Expert

2591 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

206 Answers

Are you a Craftsman Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...