...head Hi I'm looking for cylinder head torque settings for 316/318 BMW 1992 E36. I've just removed the head to repair a valve seater. so i need to put it back 30nm 90 degrees, 90 degrees Renew
Question about 1992 3 Series
...torque settings Hi I'm looking for cylinder head torque settings for a 1992 BMW 316/318 e36 BMW cylinder torque setting all models According to my service manual as follows. Cyl head to engine block ...
Question about 2003 FLSTC Heritage Classic
...torque settings for a head on a bmw 318is e36 and the sequence BMW cylinder torque setting all models According to my service manual as follows. Cyl head to engine block (torx e12 M10 bolts) Stage 1 ...
...torque settings on my bmw e36 316i 1991 j reg its not a 318i but parts of a 318i would thay fit a 316i and work fine Hi unsure what you mean by change the torque settings, if you mean on the head ...
...settings will be lost. The radio code should be obtained before disconnecting the battery or radio. Once the battery has been reconnected, the radio will not function unless the code is keyed in. ...
torque settings for the head bolts. Thankyou Hi, I guess this is an E36. Head bolts should be renewed if heads been off, as they are stretch bolts. Tightened in 3 stages, 1st 30-35 nm 2nd + 90 degrees
Question about 1997 318
Hi there I'm looking for torque settings on a BMW e36 318i for the cylinder head ,mains and big ends Try this chart for your information. http://www.championbrands.com/aera-torquespecs.pdf
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions