Questions & Answers for: torque series 1 cylinder head

Question about 2001 Discovery Series II

1 Answer

cylinder bolts or the manifold bolts. Do not reuse the old head bolts. These are torque-to-yeild type bolts and stretch when torqued down. Starting in the center and working your way outward: 1st step

Ad

...1-8) to 37 ft. lbs. (50 Nm). Using a torque angle meter turn the bolts 90 degrees in the proper sequence. Left side exhaust manifold. Torque the bolts to 12 ft. lbs. (16 Nm). Spark plugs. Torque the ...

Ad

Question about 1995 Discovery

2 Answers

...torque. Engine with Suffix B, Cylinder head will have 10 bolt's. Ft.lbs (N.m) Step 1 - 15 ( 20 ) Step 2 - Additional 90 deg. Step 3 - Additional 90 deg. Engine without Suffix B, Cylinder haed will ...

...1-8) to 37 ft. lbs. (50 Nm). Using a torque angle meter turn the bolts 90 degrees in the proper sequence. Left side exhaust manifold. Torque the bolts to 12 ft. lbs. (16 Nm). Spark plugs. Torque the ...

Question about 1998 Pickup

1 Answer

...1: torque in sequence to 51 Ft/Lbs Step 2: torque again in sequence to 51 Ft/Lbs Step 3: final tighten all bolts an additional 90 to 100 degrees recheck final torque in sequence *** CAUTION ***engine ...

Question about 1998 Pickup

1 Answer

...1. Tighten each bolt to 7-9 foot pounds of torque. 2, Tighten each bolt to 12-14 foot pounds of torque. 3. Mark each head bolt and head with aligning marks. Tighten each bolt 1/4 turn (90 degrees). ...

...1/4 turn, the bolt torque should be over 122 N•m (90 ft-lb). Otherwise, buy new bolts. Once all that is done, tighten head bolt number 9 Cylinder Head Bolts Location and use Tightening Sequence to 33 ...

...1.9 dohc cylinder head torque specs and sequence Cylinder head bolt tightening procedure: CYLINDER HEAD BOLT TIGHTENING SEQUENCE: INTAKE SIDE 8 4 1 5 9 7 3 2 6 10 EXHAUST SIDE In sequence, torque the ...

torque Tata indica.Indigo, Indigo Marina, (Rover) Cityrover Cylinder head : Renew Bolts Yes/ do inspection before reuse Tighten 29 Nm Tighten 49Nm Slacken off 90 degrees tighten 64 Main Bearings Renew

...cylinder head Torque specs and the order are listed here. My mother worked at Land Rover for 18 years! Land Rover Head Bolt Torque Specifications Helpful Andrew (above) has provided details of one ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...