Questions & Answers for: toro hot start fix

...Toro s 200 model 38130 1979 snowblower. it would not prime no suction when bulb pushed. I replaced the diaphragm with a kit diaphragm first to carb etc. along with new needle valve and spring. Now I ...

...Hot wires & terminals When I removed the air cleaner, I also saw a little gas pooling in the (end of the air cleaner chamber) input to the bowl. I suspect this is not the typical problems for ...

...Toro blower. Yesterday, when using the blower (all I use) the cord got hot and started to melt both the blower cord and extension cord; First time ever I have had this problem. If it is getting hot ...

...Toro Personal Pace mower, Model 20041, with electric start, I have installed a new spark plug RJ19LM, new oil and air filter 491588S, the first start is excellent when cold, after stopping to empty ...

...toro push mower has a 6.75 Briggs and Stratton it was running great and it died iI checked for fire and it has fire I cleanded the carb bowl no dirt or water I cleaned the points and yhe float is ...

...toro ztrn smokes when I stat it. it a white smoke is that the rings or something else? it's a fh 580v 19hp motor on a 52" deck hi.. your inlet valve stem seals are worn out, so oil will be drawn into ...