Questions & Answers for: Jeep Grand Cherokee top o matic

Sensor removal on top of driver's side shock absorber I need to know how to remove the sensor that is located on top of my drivers side shock, so i can replace the front shock? The sensor is located ...

Ad

what auto matic steering fluid do I use for a 1995 Jeep Grand Cherokee dextron II or III Hi Shuhoops, There may be some confusion. You mentioned 'automatic steering fluid'. If you meant automatic ...

Ad

...cherokee v8 .Any free pdf manual downloads? in the 5.2L V8 engine the coolant sensor is located on top of the engine. Locate the coolant thick hose coming from top of the ratiator to the top of the ...

Question about 2004 Grand Cherokee

1 Answer

...fluid Auto matic trans? look for dip stick tube on either side of engine. If it is a maual trans 5/speed look for a plug on one side of the transmission about half way to the top of the

Auto matic trans. 4x4 slec-trac. Won't shift into 1st gear. Starts off in second gear. Jeep Grand Cherokee 4.0 motor. Need to adjust the selector cable

Question about 2001 Grand Cherokee

3 Answers

how do you brake the top nut on the front top shock you should have struts,not shocks. do you see three nuts around the big nut you asked about? if you're replacing the struts,you'll need to remove ...

...i was wondering if it uses the same lug nuts as the original tire if the lugs are a closed top lug, they may not tighten down enough to secure the spare. if they are the open top/hollow lugs ...

Question about 2002 Grand Cherokee

1 Answer

matic transmission fluid don't fill it to the top its going to be time consuming but put some in and try it if it doesn't pump to the top than add more till it works to the top hope this helps

Question about 1997 Grand Cherokee

3 Answers

...the sensor and the bolts that hold it in. Whether you are a 4.0 5.2 or 5.7 its on the right hand top or near top of transmission if you can get it from the top the better you will need a 1/4 ...

I have a 95 grand Cherokee 4.0 the climate control and info center are not working at all, I have lights to the buttons but no display at all. I have checked all fuses everything is good. Whatis wrong

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...