Questions & Answers for: top mark

Question about 1999 Accord

1 Answer

...top the crak gear has a mark by the key way put this at 12 oclock if you look there is a mark on the block align it with it on the back of the block thres is a 12 mm bolt remove it and slide a 8 mm ...

Ad

...the top mark and the bottom gear with the bottom mark. Please note that you will need to undo the battery for a few minutes and then reconnect. This allows the computer to reset itself. Hope this ...

Ad

...of 5 marks what is the 10 mark The timing marks indicate degrees of advance. Thus, the first mark would be top dead center and in increments of two it increases to 10 degrees before top dead

...of your cam sprocket. They should be even with the top of your jug... the marks cams should be top dead centre and there timing plugs on your bike pull them out there a mark they or top dead ...

Question about 2000 Sportage

1 Answer

top with the mark on the cover, as the camshaft pully to the right with the E should also be at the top aligned with the mark on the cover, and the crank should have its mark also at the top ( the cut

Question about 2007 Impreza WRX STI Limited Sedan

1 Answer

...top marks on the rear timing covers, and then there are two marks on the bottom of those pullys that need to be lined with the marks on the two bottom pullys, as well as the two side marks on the ...

...top of the pulley.the mark on the pulley is usually just a slot(groove) cut into the pulley that you line up with the marks on the timing cover showing the degrees of timing,note there is before top ...

Question about 1996 Corolla

1 Answer

...on top dead center rockers are rocking and the mark on the harmonick balancer shows marks on top dead center and the over head cam has a mark on it to lines up with a mark on the timing cover

...Top dead center mark is after the fire mark so pull spark plug use a straw bring piston to top and check which mark is at the timing mark.the firing mark are always before the piston reach top dead ...

...mark for Top Dead Centre, (TDC). there is a set of numbered marks either side of it. The pulley is marked for both Top Dead Centre and Bottom Dead Centre, (BDC). Being a Mercedes the marks are in ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...