Questions & Answers for: Ford tools

...you help me solve this promblem...ty Assuming your talking about the circular line release tools? The cheap plastic versions do not work very well on older lines that have even a little

...require a special tool to release line from fitting. Look here its a good listing of disconnect tools with the tools application along side of it. Probably A379 ...

ford setting camshaft tool leanth &thicknessof setting the tool ford zetec I would say you are better off buyin the tool from a tool truck like cornwell matco its a two peice kit it only costs like 20

...pull out tool attachment the tool attachments must have hexagonal locking bits that fit into the tools jaws unless the tool is air line pressure quick fits then these have locking rings around the ...

how to you use the tool to remove a fuel filter on How to you use the tool to remove the fuel lines from the filter on a 1996 Ford F-150 I6 4.9L? spread the tool open and put it over the line, then ...

WHAT SIZE TOOL IS NEEDED TO CHANGE PADS ON THE 07 EXPEDITION Is the tool hex or a star tool & what size tool is needed i belive its a t45 hex or called a torx head.

...means you have it in right. Do not push it in as far as it will go. Now that you have both tools set, gently pry outwards towards the side the tool is inserted in...both at same time.

I am putting a fuel pump on my 1998 Ford Mustang. I have the special tool that is supposed to release the fuel lines. However, I cannot get the lines to release. They will turn but not release. Is ...

...work area clean and well lit. a. Cluttered or dark areas invite accidents. Do not operate power tools in b. explosive atmospheres, such as in the presence of ?ammable liquids, gases or dust.

...F250 7.3L- I need to take my radio out to get to the Body Control Module. I bought the U-shaped tools to get radio out but it simply will not come out. Have been at this for hours. Thanks There ...