Questions & Answers for: toner drive

Re Toshiba copy machine 4560 Machine powers on and asks for toner. We put in a brand new toner, but it still asks for toner. Can you help email [email protected] It needs a toner gear. There is a worm

...carrying the roller-check toner motor is pluged firmly in its socket-go to rear frame and check toner selonid is working and in good condition-check gears that drive toner roller in good

...toner drive gear meshes with the cartridge. make sure the drive gear/hub is the same shape as the little part on toner cartridge that it meshes with. sometimes, you can get a kyo-mita toner cartridge ...

...toner drive motor/drive assembly. Otherwise, remove and disassemble the toner hopper and clean it up. Make sure the four clear 'scooper' tabs are attached on the back of the receptacle that fits ...

...toner drive motor and will need service. If the code comes back after the cartridge is re-installed then there is either a problem with the cartridge or with the toner bottle drive. Most of the time ...

toner replenishment drive system. Replace the cyan toner container. 2. Defective toner motor 2. Replace the toner motor 2. 3. Defective engine controller PWB (A0004). Replace the engine controller PWB

...183; Toner collection motor defective· Too much load on the drive mechanism· Poor toner collection motor connector connection· IOB defective· Toner collection motor sensor ...

after toner change toner continues to mesage toner is vempty Make sure to shake toner cartridge 5-6 times. Here's the procedure: Replacing Toner

...Drive Shaft with the attached tool and opening the Toner Container Inner Cover. When closing the Toner Container Inner Cover by hand, it becomes 1. ? 3-1. When the Toner Container Inner Cover is not ...

...toner state in the developer unit. If the bottle does not rotate when the hopper motor is turned on then there could be a defect in the bottle (you would probably hear a loud noise) or the bottle ...