Questions & Answers for: Ford Focus what are tone wheels

tyre puncture i am a new driver, i have a ford focus and i;m trying to change the front wheel with a spare one. i managed to remove all four nuts, but the wheel wouldnt come off. is there anything i ...

What is the dirrerence between the front wheel bearings and front ball joints? The wheel bearings is what the wheel turns on,the ball joint is what the wheels turn the way you turn the vehicle.Wheel ...

wheels and nothing. Never had problems before with Traction control or ABS. Had already been driving for 30 minutes with lots of times having traction control kick in. Any idea why it suddenly came on

...When car is put in reverse the parking sensors no longer beep but deliver a constant low consistent tone. Nothing is blocking or obstructing the sensors. Could be a touching wire somewhere ,,are they ...

how do i change front wheel bearing on a ford focus st2 SECTION 204-01: Front Suspension2000 Focus Workshop Manual REMOVAL AND INSTALLATIONProcedure revision date: 03/18/2003 Wheel Bearing Special ...

...what you did, ect????? You may have replaced the rotors with the incorrect ones. did they have the tone wheel for the ABS sensor? That would be the first thing to check. Whan you start the truck

Locked up Steering Wheel Your Wheels may not be straight which could cause the steering wheel lock to get stuck. Turn the steering wheel left and right, from one stop to the other, watching how far ...

...way you could get the code it would lead you in the right direction Eg: C1141Wheel Speed Sensor LF Tone Ring Tooth Missing FaultABS ModuleINSPECT the LF tone ring for missing/damaged teeth or

need to know the torque setting for the rear weel bearing on my 2001 ford focus. it takes a 30mm socket. The torque setting 49 ft. lbs. Torque Specifications DescriptionNmlb-ftlb-in Wheel nuts - steel

How do I get the rear drums off a 2000 Ford focus. I removed the spindle nut, 2000 Ford Focus Drum Removal ProcedureIf removing the drum to service the rear brakes: (note, do not remove hub retaining ...