Questions & Answers for: tone wheel Sewing Machines

Ad

Question about 1766 Mechanical Sewing Machine

2 Answers

Hand Wheel In the instruction manual it explains how to draw up the bobbin thread on page 10. It says to turn the hand wheel slowly towards me until the needle goes down then comes up again. My needle

Ad

Question about 7436 - INGENUITY

1 Answer

warning tone? When I turn on my machine the stitch selector light flashes at 88, all the stitch selector lights flash on and off, and the machine emits a high pitched beep. What's going on and how do ...

Ad

Question about 1766 Mechanical Sewing Machine

1 Answer

singer sewing machine - hand wheel On my singer the hand wheel has a smaller wheel inside the larger hand wheel that you push/pivet to release the hand wheel so you can use the bobbin winder, which I ...

Question about 1766 Mechanical Sewing Machine

1 Answer

needle centering wheel is stuck tight and cannot On my Elna Super 62C, the needle centering wheel is stuck tight and cannot be moved by hand. When I take the top cover off I can move the wheel with a ...

Question about L-373 Mechanical Sewing Machine

1 Answer

...the diameter of the rubber wheel as there are three different sizes. These run $5 +s/h. Stepping Stones Quilts ...

Question about L-373 Mechanical Sewing Machine

1 Answer

I have an Elnita 250 there is a problem with the wheel, when turning it it does not operate the needle up and down? Make sure the stop motion wheel is tight, if it will not tighten you will need to ...

Question about L-373 Mechanical Sewing Machine

1 Answer

I removed the hand wheel cover on my Bernina 1001 because the wheel was too tight and now I cant get it to do anything...sew, wind bobbin. Help With the wheel on you will have a 3 pronged washer, make

Question about Memory Craft 5700

1 Answer

...tone or fabric colour thread new thread. Then take a bobbin left hand some 3 or 5 wring bobbin thread for right hand wring opposite side then turn the bobbin take on one big needle or screw driver ...

Question about PC-6000 Pacesetter

1 Answer

...you should choose correct case size selected one bobbin. Then you should choose the fabric colour tone to tone or contrast colour cotton thread .And then finally you should Please see the link ...

fully charged, but no dial tone or incoming calls KXTGA 402 Maybe 'cuz its a sewing machine

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...