Questions & Answers for: Ford Focus tone wheel

Ad

Question about 2005 Focus

1 Answer

tyre puncture i am a new driver, i have a ford focus and i;m trying to change the front wheel with a spare one. i managed to remove all four nuts, but the wheel wouldnt come off. is there anything i ...

Ad

What is the dirrerence between the front wheel bearings and front ball joints? The wheel bearings is what the wheel turns on,the ball joint is what the wheels turn the way you turn the vehicle.Wheel ...

Ad

...have pushed one of you sensor back away from your tone wheel its a common problem,all you have to do is push the sensor back againts your wheel and it will set itself,I hope this helps you and ...

...When car is put in reverse the parking sensors no longer beep but deliver a constant low consistent tone. Nothing is blocking or obstructing the sensors. Could be a touching wire somewhere ,,are they ...

how do i change front wheel bearing on a ford focus st2 SECTION 204-01: Front Suspension2000 Focus Workshop Manual REMOVAL AND INSTALLATIONProcedure revision date: 03/18/2003 Wheel Bearing Special ...

Question about 2000 Focus

1 Answer

...have the tone wheel for the ABS sensor? That would be the first thing to check. Whan you start the truck does the ABS light come on right away, or does it go off, then on again after you start

Question about 2003 Focus

2 Answers

Locked up Steering Wheel Your Wheels may not be straight which could cause the steering wheel lock to get stuck. Turn the steering wheel left and right, from one stop to the other, watching how far ...

...tone ring for missing/damaged teeth or debris. INSTALL a new wheel speed sensor ring as necessary. REFER to Section 204-01. CLEAR the DTCs. REPEAT the self-test. C1142Wheel Speed Sensor RF Tone Ring ...

Question about 2005 Focus

1 Answer

need to know the torque setting for the rear weel bearing on my 2001 ford focus. it takes a 30mm socket. The torque setting 49 ft. lbs. Torque Specifications DescriptionNmlb-ftlb-in Wheel nuts - steel

How do I get the rear drums off a 2000 Ford focus. I removed the spindle nut, 2000 Ford Focus Drum Removal ProcedureIf removing the drum to service the rear brakes: (note, do not remove hub retaining ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,703 Questions

2001 Ford Focus
2001 Ford Focus

2,580 Questions

2003 Ford Focus
2003 Ford Focus

2,002 Questions

2005 Ford Focus
2005 Ford Focus

1,196 Questions

2004 Ford Focus
2004 Ford Focus

881 Questions

Manuals & User Guides

Loading...