...tone by connecting a phone to the ext phone port of "the machine" did you mean the fax machine? If you get a dial tone by running a phone through the fax machine, then the line is good. I have used a ...
the copier. Plug your phone into the auxillary phone port on the copier and see if you get a dial tone. Also make sure that your cord from the wall is plugged into the line port and not the phone port
the back of the 962. One for line, one for phone. You want to plug the phone line into the port that says "line" or "Fax". If it's plugged into the wrong one, your fax machine will not get a dial tone
...port. It makes several beeps of one tone, several more of another, goes back to the original tone and stops. The computer then is not recognizing the USB port. I have had the external hard drive for ...
...Tone Port Ux2 with Protools LE 7.4 002 rack Can't make it work. Uses too much CPU and computer crashes when I try to use Line 6 Tone Port with protools Le 7.4. Do you have any information about this ...
Question about TonePort UX2 Sound Card
...into the ATA from the cable modem. You just plug one of the ports of the phone system (CO port) into the same place and you'll get dial tone. That VA-208 is REALLY old :-} What, about 20 years? ...
Question about Solo-Baric L7 S15L72 Car Subwoofer
need correct air space with port displacement for high and low tones also for spl need to figure out correct air space and port displacement for high and low range tones also for spl check out ...
Question about 9920 Plain Paper Fax
...port there is no dial tone. I have connected the phone to the phone socket direct and I get a dial tone so I know that the phone and line are ok. Likewise I have tried the fax machine on its own ...
Question about SCX4623F Laser All-in-One Printer
...,but doesn't receive fax Check the basic first Make sure phone line is is the Line Port and not in the head set Port. Next if you have a tone button check to make sure you have a dial ...
Question about SCX4623F Laser All-in-One Printer
...port. Press Hook and check for a dial tone. If still no dial tone, proceed to step 3. If there's a dial tone now, move to step 4. 3. Test with a known working telephone: Disconnect the telephone ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions