Questions & Answers for: GE toggle switch

...toggle switch on the right side is in the "locked" position. Slide the toggle switch on the top middle to the number "1" then press the arrows on the top right side to set the time then slide the ...

Electric Glass GE Profile Cooktop Burner popping The right burner that toggles from small to large size is not working. I noticed that the rod that the nob attaches to is not pulled up. When I pull it

...failed. Light sometimes come on when the door is opened but now, it does not come on regardless of toggleing the switch. I have an 8 year old GE Profile side-by-side refrigerator. It works fine ...

Start Switch Broke Start switch, which is normally turned to the right and toggles back, was inadvertently turned too far. Now the switch rotates and does not start the dryer. Is there an inexpensive ...

...toggle switch and install it under the microwave on the right hand side near the control area. But make sure the switch can handle the heat rising from the stove burners. We have about 120 of the ...

...switch box Toggle switch box has 3 switch face plate. Timer has 1 faceplate. The light I want to put on the timer is on the middle toggle switch. Wires to existing toggle are 3 black wires and one ...

...toggle switch or when you look at the top of the ice cube maker you will see a stainless bracket about the size of a pencil lead and as long as the ice cube maker. If the bracket is up then the ice ...

I have a FCM5SUCWW GE freezer and there are 2 unmarked toggle buttons/switches next to the light by the control panel. What are they for? The manual says nothing about them. They are usually for extra

toggle the switch to warm and hot and for a brief moment get warm water but you can hear it switch to cold and then just fills with cold water, trying to determine if it is the temp sensor or valve or

...switch to cold. you can toggle the temp selector dial from cold to hot and you get warm water for a couple seconds and it switches to cold.Trying to determine if it is the sensor or the valve. Is the ...