Questions & Answers for: Gardner Bender toggle switch

circuit breaker trips Just installed a Gardner Bender SPST Switch Kit (GSW-SK) for my coat closet so the light comes on when the door is opened. Went to reset the breaker but it won't. Clearly ...

Can you describe how to wire this switch between an electrical outlet and an overhead fluorescent light? I have recessed the electrical switch box in the door jamb. There are two black wires on the ...

2 way light switch tripping breaker Front entry light has a switch at door and a switch in kitchen. New build forclosure. I have the switches with both sides in the same direction say up. The breaker ...

Rotary switch wiring problem I'm trying to hook uo a high hat in a china cabinet. I was looking for an on off switch so the hardware store recommended the GSW-69 rotary switch. I conneted a 2 wire ...

...wall switch that controls lights, I would recommend replacing it with a standard toggle switch. They are rated for 15 and 20 amps. Those button switches are meant to be used to control single

I am installing a new closet with double doors. Can I put a GS-SK SPST Switch Kit in both the left and right jambs, or must I use only one kit in one jamb? Thanks. You can use a switch in both jams, ...

i am replacing the gsw-34 3 sp. pull chain switch . i have the wires marked. do i have to cut the wires off the old switch or do they release somehow? they are the stab connectors. There are 2 type ...

...toggle switch GSW-13 SPDT Toggle switch The wire that comes from the power source (the "hot" one) goes to one terminal screw, and the wire that goes out to the switched device goes to the other

Gardner Bender #GSW-SK Door Switch I would like to install this switch in a pocket door, however there is not enough room on the jamb for the installation. I was thinking that it may be possible to ...

...toggle switch is for? The lights on my '91 bass boat does not work. I have a switch up front and the one at the steering wheel which I think is the first one from battery. I'm not reading any voltage ...