Questions & Answers for: Hyundai tires negative camber

negative (-) front toe, or a combination of Camber and Caster measurements (cross Camber) adjustments. Hyundai Parts department stocks (or can order) Camber kits & Service can install them if this

...tires showing wear on inside edge like camber problems. dealer says the alignment is ok but print out shows to much neg camber for me on left rear at .72 deg and right at .32 deg also it wanders on ...

...camber kit I had this vehicle aligned at hyundai and tires wore on the inside after alignment when I brought it back they said that I didn't know what I was talking about. I brought it to a Goodyear ...

what are the front toe in parameters for Hyundai Tucson? Wheel & Tire Wheel alignment Front Rear Dimension Toe-in Camber Caster angle(to ground)) King pin angle King pin offset mm(in.) Side slip ...

negative camber on both rear tires. I recently took the car in for a new alignment at a different shop. The rear camber readings came back: Left, actual -0.2, before -1.8 Right, actual -0.2, before -1

CAMBER measurements between Left & Right? This can also cause pulling. Additionally, if the front tires have been worn UNEVENLY (meaning they have become CAMBERED), this will also cause 'pulling.'

I have an 07 Sante Fe and it eats the rear tires on the inside. Can you adjust the camber on the rear? Toe will chew up your tires much quicker than camber will

...camber of the road surface. ^ Cross-winds - A sometimes overlooked, yet possible cause of steering drift is cross-winds. Side winds at higher vehicle speeds may cause vehicle pull. Please do not rule ...

...negative camber on front end of sonata 2007 you are going to have to buy yourself an alignment rack and learn how to use it. might be faster and much cheaper to take it to a tire shop which does ...

...tires at 47k miles. NTB says the manufacturer does not specify front camber and caster adjustments Hyundai will tell you different so call then and get the exact degree setting from them The 800 ...