...tire and pull up quickly and hard...does it 'click'? Now, do the same from front to back. Up and down wear is ball joints...side to side is tie rods. Get a mechanic to help you. Many chains will ...
...tire) problem, u may have to have a Camber adjustment kit put in, most new cars have no adjustment provided for this. the bottom line here is you need to see a really good front end shop to get this ...
wear for replacement tire for 2007 chevy tahoe. WHAT TIRE SHOULD I BUY. FACTORY BRIDGESTONES GOT ONLY 30K MI.????????? Tahoe's are heavy and wear tires very fast 30k is pretty good actually for tahoe.
Rear tires wearing on inside of 2007 Impala I am on my third set of tires has anyone checked the alignment? this should have been done when the first set of tires were wearing irregularly and replaced
rods in rear are bent causing tires to wear the rods in the rear tires are bent and its wearing the tires down on the inside do you mean the tie rods or are you just looking there and see a part that ...
...end needs to be realign, the wear your getting is call toe wear, mean tire's are pointing out, and will wear tire's on inside edge, have it realign and that will take care of your tire wear
...tire wear doesn't occur on the left or right side of the tire as viewed from the front. I would continue to rotate tires every 5,000 mi. or so, and have the alignment checked at a place like Sears or ...
Question about 2007 Suburban Three-Quarter-Ton LS
...wear on any of the tires on the vehicle and then verify that all the tires are the same size, brand, and same model. It is also important to check and make sure the tire pressure is properly adjusted ...
tire then the tires are under-inflated. Inflate to the proper psi. If the tires are wearing only on one side, ie, left side tires wear on the left side, right side tires wear on the right side or vice
tire wear.but with tire wear on the outer 1/2 of the tire indicates either the camber setting is off or you could have bad rear springs changing the ride height of the car causing the change in camber
Usually answered in minutes!
4,236 Questions
3,219 Questions
2,541 Questions
2,307 Questions
2,177 Questions