how to set the timing marks it depends if you have a sohc or dohc there are timing marks on the cam gear(s) that line up with the top of the head and the crankshaft pulley has timing marks to line up ...
Timming belt broke My timing belt broke and I am not sure about the timing mark on both the cam and the crank or is there any marks at all I am not sure I haven't had it apart yet. Go to your local ...
messed up and took head off without putting #1 piston at TDC I need help!!!!!! I took the head off my 1.5 89crx without putting the #1 piston at TDC first. Now I'm having one hell of a time getting ...
Still need advice I totaly messed up and took the head off without putting the #1 piston at TDC. I simply shut the car off and went right to work taking off the head without marking anything! I ...
regards to timing problem the only problem is, when you turn the distributor shaft, the shaft doesnt line back up with the cam. On these models, the distributor only goes in one way, eliminating the ...
1989 honda crx Does the timing belt pulley on the cam only go on one way? It seems the cam needs to be turned so that it faces the #1 on cap then line up the pulley marks? If you haven't had the ...
one more Q thanks say my timing belt is broken do i need a new engine ? ive tryed to start it turn it over about 20 times but im not getting to crazy with it cause i dont want to blow the starter but ...
...15 valve fitting timming belt to 95honda domani vtec 15 valve d15b engine of 1493 cc after aligning all the marks start from the bottom and route belt counter clockwise around ending at
have a 93 honda civic car has new spark plugs,timming belt, fuel pump, distributor, can will turn over but wont start have had three people to check they can find the problem and just brought new ...
i have 88 honda crx 1.5 i need the timing mark diapharm and am going to change the timing belt so i need the timing mark diapharm Here you go. give these websites a try www.alldatadiy.com and ...
Usually answered in minutes!