Questions & Answers for: Honda timming marks

Ad

Question about 2005 CRF 100 F

1 Answer

...timming how do i put the camchaft in time on a 2006 crf 100 the timing marks are on the gears. You will see tiny little mark or arrow. One on each gear. They have to be pointing at each other to be ...

Ad

...15 valve fitting timming belt to 95honda domani vtec 15 valve d15b engine of 1493 cc after aligning all the marks start from the bottom and route belt counter clockwise around ending at

Ad

Question about 1990 Civic

1 Answer

90 honda civic 1.6 timming marks here's the top, the bottom has marks on the crank sprocket or use the crank pulley and lower cover.

Question about Quincy 17 - Gallon Air Compressor with 5.5 Hp - G15H17PC3B

1 Answer

WHAT ARE THE TIMMING MARKS ON A HONDA GX160 ENGINE I an not see a timing mark on the crankshaft gear to line up the cam gear any other method

I'am looking for the timming marks on the honda 1998 crv Timing marks for timing belt, timing marks for honda accord Lx 1991

Question about 1990 Prelude

1 Answer

...There is a small opening, on the front of the tranny, at the bell housing where the timming marks are visible. It might have a rubber plug, in that opening, that pulls out for viewing the

Question about 1983 GL 1100 Innerstate Gold Wing

2 Answers

...timming is correct.!! Sincerely Joe marx You do not put on a belt unless the cam and the crank are in the correct positions. You have to be very careful not to turn the motor and bend a valve. There ...

Question about 2002 Odyssey

1 Answer

should the left cam rest on the mark in adjusting the cam pulley to the timming mark on the housing should the left cam pulley be at rest on the mark or loaded? Loaded.

...timming mark or loaded i adjusted the cams to line up the marks, but the left cam is loaded and is hard te keep on mark. is that normal Quite normal on lots of cars. You need to have the key removed ...

...timming chain,line up the cam and crank timmind marks install the chain and start it ,if the m,arks stay lined up and runs ok your set.I'ts cheap and easy to do for just the price of a timming ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5924 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...