Questions & Answers for: Honda Odyssey timming mark

Question about 2001 Odyssey

1 Answer

Timing belt I am wanting to replace the timing belt in my 01 odessy. I would like to find a belt routing diagrapm and amount of time to fix it. Hi you can replace the timing belt in about two hours or

Ad

I am in the middle of replacing the timing belt on a 05 honda odyssey touring, before removing the old belt, the manual is saying to turn the crankshaft pulley to its white mark [which i can see] ...

Ad

engine has a whirring noise, like a dry bearing on a pulley.assuming its a pulley because it gets louder when revving engine. The noise u hear is most likely coming from a defective power steering ...

i have a problem with my honda odyssey 1998, the engine just turns off when i am driving sometimes then i wait 1 minute and start it again and another 20 min or so it does the same thing again, is it ...

Question about 1998 Odyssey

1 Answer

i have a honda 1996 odyssey when should the timming belt be changed Honda states that the timing belt should be changed every 92k

Question about 2002 Odyssey

1 Answer

should the left cam rest on the mark in adjusting the cam pulley to the timming mark on the housing should the left cam pulley be at rest on the mark or loaded? Loaded.

...timming mark or loaded i adjusted the cams to line up the marks, but the left cam is loaded and is hard te keep on mark. is that normal Quite normal on lots of cars. You need to have the key removed ...

2001 honda oddessy crank but won't start after change timming belt, now engin will only crank, but will not start are you sure you have the timing marks correctly lined up? If so, try holding the ...

The key on my 2004 Honda Odyssey is having trouble going all the way into the ignition to turn on the van. Sometimes it's getting stuck half way down, sometimes almost all the way down, other tim ...

2000 honda odyssey v6 I need the timing mark on both camshaft and crankshaft The cams are very distinctly marked, and numbered for the cylinders, with a cast mark in the aluminum cover behind the cam ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...