...mark on crank shaft do ineed to by pass if so how do i do it there is no timming to set it is done by crank position sensor check ignition coils if they have rust they will cause missfire.also check ...
My timming belt slipped on my 93 sunbird. Where can i go for a free step by step repiar manual. I Have Pictures But they must be Emailed as JPEG file FixYa Does not have Un-Encription software so that
need to check the timming on a 98 grand am 2.4L twin cam by check timing do you mean base ignition timing or cam timing ,base ig. timing is handled by pcm not adjustable cam timing can be checked by ...
can you be 180 degrees off on the crank shaft when timming marks are aligned on a 1990 pontiac sunbird If you have all the marks lined up, I would say no. You could check the piston location by taking
need to know where to set the timming marks on my 94 sunbird Should be located on the timing cover and also on the crank. Hope this helps.
no timming marks on the engine block Thats right. It can't be set!
Question about 1996 Grand Prix
have no spark at all 4 coils on my Pontiac vibe 2004. replaced head rebuilt, set timming to correct marks,all components back in place.engine cranks over but no spark to plugs? exhaust cam went bad, ...
Question about 2003 Grand Am
where should the timming marks be on a 2003 pontiac grand am 3400 v-6 Putting on timming chain need to know where to set the marks. Thank you. This may help you: ...
setting timming on 2001 pontiac grand am 2.4 the engine died while driving checking the crankshaft bolt was comming out i took the timming cover off to check chain but cant get the crank to move ...
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,435 Questions
1,496 Questions