Questions & Answers for: Plymouth Voyager timing cover

...the bolts are under the timing cover. If the engine is a 3.0L the bolts are also under the timing cover. Both require removal of the timing belt. If it's a 3.3L the bolts should be able to be

the water pump is located behind the timing cover. It is also driven by the timing belt, so while in there making the repair to the water pump you should go ahead and throw a new timing belt on there

...CYL. is it a 3.0L or a 3.3L -3.8L....if it is a 3.0 the water pump is under the timming cover..and if you change the water pump while you are in there change the timing belt cause it will go soon ...

timing cover and if this goes do you need to replace timing chain and water pump engine with 3.3 liters and 3.8 liters are equiped with timing chain. the timing chain cover is the cover that cover and

...belt replacement of the timing belts in these engines is a very involved job. Most of the front of the engine must be removed and the cover can't be removed without removing the crankshaft

cover to the timing belt and the alternator with its bracket.Loosen and remove the bolts to the water pump and remove it from the engine.Install the new water pump after inserting a new o-ring gasket.

...cover to the timing belt and the alternator with its bracket. Loosen and remove the bolts to the water pump and remove it from the engine. Install the new water pump after inserting a new o-ring ...

...timing cover and timing belt assembly.this means every thing between the engine block and the inner fender has to be rimoved to gain access to the water pump.when the water pump is changed you should ...

...timing belt cover mark.8Connect the timing belt onto the Voyager's crankshaft sprocket, keeping the belt tight on the side of tension. Install the belt in the same rotational direction if using ...

...Disconnect the negative battery cable. Drain the cooling system. Remove the drive belts. Remove the timing belt covers and the timing belt. Remove the water pump mounting bolts. Separate the water ...