Questions & Answers for: Kia Sedona timing cover

crank sensor location Mounted behind the engine timing cover above the crank pulley.removal of the timing cover is required.

...timing belt cover, but the the cover close to the timing belt wont come off the head, is there a bolt in the middle of of the cover near the the belt side, you need to remove the crank pully and the ...

cover timing marks. Fig. Timing belt routing and timing marks-3.5L Engine Remove or disconnect the following: Auto tensioner Timing belt Fig. Timing belt and related components-3.5L Engine To install:

cover timing marks. Fig. Timing belt routing and timing marks-3.5L Engine Remove or disconnect the following: Auto tensioner Timing belt Fig. Timing belt and related components-3.5L Engine To install:

cover timing marks. Fig. Timing belt routing and timing marks-3.5L Engine Remove or disconnect the following: Auto tensioner Timing belt Fig. Timing belt and related components-3.5L Engine To install:

...timing cover there is quite a bit to get out of your way. Just the pulley for the power steering pump (which has to be removed) has a special tool. I would suggest you really get somebody who knows ...

...timing cover(s) Align the timing marks Loosen the tensioner Remove the tensioner Remove the timing belt Check the gearwheels, tensioner and idler pulley(s) for damage and wear Renew if necessary ...

cover and have someone turn over engine. If valves are moving the timing belt is OK. , if not the timing belt broke or is loose and may need replaced. Check internal timing pulleys as well for damage.

...timing side plse help me to solve this your valve cover gasket is ok they have half moons and they dry up they should be replaced and put a little silcone on them before the valve cover as well you ...

is the crank shaft position sensor on a 2009 Kia sedona located behind the timing belt cover. I get a code a P0018.How hard is the removal of the tinming belt cover? yes near the bottom pulley