Questions & Answers for: timing belt jumping tooth

...timing belt has jumped a tooth, you must d a compression test, then get a repair manual to check if the mechanical timing is of indicating a jumped tooth on the timing belt. sounds like you have some ...

...a common problem or do i need to replace another part. Timing belts stretch they just snap.If the leading side was installed loose the belt could have jumped.Also check the timing belt pulley ...

how does it jump timing The timing belt will stretch over time, as the motor runs, the belt can jump time, by the gear slipping a tooth on the belt.

...TIMING BELT ALONG WITH WATER PUMP.NOW THEY TELL ME I NEED THE ENGINE TO BE REPLACED BUT I THINK THAT THE MECHANICS MIGHT HAVE SCREWED UP PUTTTING THE TIMING BELT OFF A TOOTH. THE ENGINE WAS NOT ...

...timing belt has jumped a tooth on the belt ,but without looking i cannot say but i would hazard a guess and say the starter motor has made a noise which is what you heard , But if the engine was ...

...timing belts jump a tooth and if so what are the marks Both the 2.2 and the 2.4 engines use a chain, not a belt.A chain could still be faulty, but I doubt it would jump teeth unless the tensioner ...

timing belt is off by one tooth could it cause it not to crank? 98 neon 2.0 L single cam The pulley on the crankshaft turns the timing belt The top ends of the timing belt turn the cams You need to go

timing belt jump had to replace water pump and in doing so had to take out camshaft pulleys and timing belt etc. Putting timing belt back is a task in itself but when i put everything back and i mean ...

timing belt so ok here we go. put everything back in its place and i mean TDC. All my marks lined up and ready to go. I even turned it over to revolutions and still came up TDC. Wonderful right, wrong

2001 XLS. Why is it jumping like it's not in gear? I have had the timing belt replaced recently. sounds like the timing belt may have jumped a tooth, get it checked asap