Questions & Answers for: Ford Festiva timing

timing i have a ford festiva 95 i can not find the timing belt marks on the hand i found the timing marks on the pully there are 2 so is there 2 other marks or just the one There are two. One is at ...

Replacing Timing Belt on 1993 WA Ford Festiva Can someone tell me at what position the marks on crankshaft pulley and camshaft pulley have to be when replacing a rubber toothed timing belt that has ...

Can you tell me where I can print instructions for free to help me change my timing belt in a 93 ford festiva Here are the instructions for removing the timing cover, and for replacing the timing belt

1988-1993 ford festiva leaking oil around the crank pulley... could the oil be coming out of timing chain seal... are could it be a the seal on the crank shaft.. if so would i need to removle the ...

...not even attempting to fire.? Any help ? Sounds to me like a classic case of a failed or slipped timing belt. If your timing belt is worn, stretched out etc and it slips a few teeth your car will ...

i have a 1997 volkswagen jetta its starts hard after it snow or rains and also will sputter and stall from time to time when it is snowing or raining what could be the problem Its due to condensation ...

...the engine, on the first mark, in the middle or on the other mark? it keeps throwing itself out of timing. Is this to do with the Distributer? This is a general view of the timing marks on the

I need to set the timing on a 93 festiva You need a timing light (assuming that it is the ignition timing that you want to set) Locate the timing mark in the crankshaft pulley and mark it with chalk ...

I have a hard time starting an 1988 Festiva..I have to crank and pump the gas several times..whe it finally starts it emits ver rich exhuast..Is it a carb problem or burnt valves in the head? Well it ...

how do i set the timing on my 1990 Ford Festiva Find a timing light and hook up pos. to battery negative to battery and clip on lead to no 1 plug wire, start engine and point towards from pulley ...