...setup to record on the 625 receiver. To delete the timers, press the DVR button on your DISH remote 2 times. This brings up the "My Recordings" screen on the TV. On the right side of the screen are ...
Question about ViP722 DTV Receiver / 350-Hours Video Recorder
timer has not been setup that is recording Monster Trucks or anything else you did not intend on recording. To get to the timers, press the DVR button on the remote. This will display My Recordings on
...the picture returns, see what is displayed. If it still has the wrong information, delete the timer and setup a new one to see if this will resolve this issue. I hope this helps. Ray Calo DISH ...
...timer that needs to be edited. Select Edit. Make the desired changes then select done.Let me know if this help. lpierson382 You can check the start and end times on your receiver to see if the timers ...
Question about ViP722 DTV Receiver / 350-Hours Video Recorder
...couple and their recordings are messing with my TV viewing on TV 2.. Thank you utdivemaster When timers are setup, it will record by default (unless it is changed) to TV 2. You can go into the ...
Question about ViP622 DVR DTV Receiver / 180-Hours Video Recorder
setup DVR to record speed channel daily at 7 pm now every night at 7 the channel changes to speed channel how do I stop it? florami The following is instructions for deleting timers from your receiver
...> Point Dish(1). Select check switch then test. Once it's done exit out. I would also check your timers after the reset to make sure they're setup as they made have been deleted during the ...
Question about ViP722 DTV Receiver / 350-Hours Video Recorder
...on tv 1. It will record only like 10 minutes or less and stops recording jeff_rhondac, Check the timers you have setup for the programs that are suppose to record. Make sure the timers are setup ...
...and continue to get this message..... wlmbug,Our receivers can only hold a certain number of timers before some have to be deleted. To fix this message, on most receivers, press the DVR button ...
Question about ViP622 DVR DTV Receiver / 180-Hours Video Recorder
setup an Auto Tune timer. This will cause the receiver to exit standby mode and tune to a channel. To set this up, find a channel you want the TV to go to, and choose the time you want the receiver to
Usually answered in minutes!
1,193 Questions
265 Questions
120 Questions
120 Questions