Questions & Answers for: Kenmore how to get time to show up Air Purifiers

...filter. Earlier today I replaced the filter for my Kenmore 85501 air purifier for the first time. Several hours later, the "Filter" light is still illuminated. How do I make that light turn ...

...for a few months. The way to clean is: Unplug remove the white cover remove the prefilter. Good time to clean the prefilter by removing the 2 retention clips and gently swing the prefilter

to set the amount of run time desired up to 8 hours. If you press the timer button 9 times it will return the unit to no timer control function and the display panel should show no time in it's window

...Sincerely, Kris Try pressing the clean cell now button & check pre filter button at the same time hold buttons down at the same time for about 5 seconds with the air cleaner turned of and blue ...

which way does the filter go? I'm replacing the pre-filter and the hepa filter. Is there a front or a back to either? The hepa is a white square that looks the same front and back, except for diagonal

...on the prefilters which are not washable. You will need to check it once a month to see if it is time to replace. If you have good maintenance on the unit and change the cheaper prefilter, you

...I reached inside with the wet swab as far as it would reach. - While you are in there, take some time to remove as much dust off of the front panel and anywhere else it may be. That did the trick ...

...even when the filter is clean. What is the problem? If it's only doing it for a short period of time, it's picking up dust in the air and zapping it like a bug zapper. If it's continually doing

Our humidifier is showing two dashes -- flashing on the display. What does this mean? It is not receiving meaningful input.

...as it probably means that all systems are ready to receive some directions from you. ie start , time level ...