Questions & Answers for: time bmw e36 318 engine

Ad

Question about 1996 318

2 Answers

Fan

...time so its quite possible that your car has it on certain 3 BMW's (E36), the A/c filter (polymer filter) is situated inside the car at the Rh side of the centre console (loosen the cover on Rh side) ...

Ad

...e36 BMW cylinder torque setting all models According to my service manual as follows. Cyl head to engine block (torx e12 M10 bolts) Stage 1 30nm (22 ft ? lb) Stage 2 + 90 degrees Stage 3 + 90 degrees ...

Ad

Question about 1992 3 Series

2 Answers

e36 bmw 318 1991 my bmw e36 318 was driving fine then all of a sudden died and no throttle responce and now wont start again check fuse? relay of fuel pump?(in the separate box beside the fuse box? is

...Bmw 318i and just had the head rebuilt but i need to know how to set the engine timing Cylinder #1 set at TDC, compression stroke. Cam marks level with head, aligned with mark on cover, or if unclear ...

...and the engine at TDC. how to do timing on a bmw 3 series engine chain http://www.bimmerwerkz.com/forum/3-series-e36/m40-motor-timing-info-59059.html is camshaft and crankshaft marking to be safe ...

Question about 1996 318

1 Answer

bmw 316i E36 i am working on head gasket and i took the timing chain adjustor tension loose cos i cannot turn the crank over to line up so i thought something inside might have jammed so i marked it ...

Question about 1997 318

6 Answers

...BMW e36 section and post the question. If no one here can tell you definitively, RoadFly guys will. No, the '87 has the M20 engine, with a rubber timing belt, and much less power. The '96 should have ...

...BMW E36 (325, 358, 318 etc.) What you are probably describing is a valve tap. Sort of a ticking sound not a bang bang bang right? If this is the case you need to have your valves adjusted. Not really ...

E36/318/1997(Malaysia)...using timing belt or timing change this engine should not have a timing belt, the m 40 engine had, this should have a chain which is for lifetime in the car. no replacement ...

Question about 1997 318

1 Answer

engine 318i e36 car has petrol and spark,just cranks and wont start,sometimes it will start for a second and just dies Check compression and timing. Then check sensors(MAF, oil pressure sensor). Don't

Not finding what you are looking for?

Family Lines:

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22331 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...